Dual Layer Flexible Printed Circuit (FPC) Built on Polyimide With Connector for Multicoupler
(Flexible printed circuits are custom-made products, the picture and parameters shown are just for reference)
General description
This is a type of 2 Layer flexible printed circuit (FPC) built on polyimide for the application of Multicoupler.
Basic specifications
Base material: Polyimide 25μm + 0.2mm polyimide stiffener
Layer count: 2 layers
Type: Individual FPC
Format: 119mm x 84.7mm = 1 type = 1 piece
Surface finish: Immersion gold
Copper weight: Outer layer 35 μm/ Inner layer 0 μm
Solder mask / Legend: Yellow coverlay / No.
Final PCB height: 0.20 mm
Standard: IPC 6012 Class 2
Packing: 100 pieces are packed for shipment.
Lead time: 10 working days
Shelf life: 6 months
Features and benefits
Reliability increased;
Controllability of electrical parameter design;
The end can be whole soldered;
Impedance control test and solder-ability test;
Quick and on-time delivery;
16000 square meter workshop;
Quick CADCAM checking and free PCB quotation;
Prototype PCB capability;
Volume Production capability;
Applications
Instrument panel, POS touch screen soft board, Industrial control temperature controller soft board, mobile phone module flex board, telephone receiver / earphone FPC, consumer game consoles
Specifications of Standard 1 Layer FCCL
| Single side adhesiveless flexible copper clad laminate (SF201) |
| Specifications | Thickness (µm) | Copper Type | Applications |
| Polyimide Film | Copper Foil |
| SF201 0512SE | 12.5 | 12 | ED | Motor, digital products etc.as univeral connector |
| SF201 0812SE | 20 | 12 | ED |
| SF201 1012SE | 25 | 12 | ED |
| SD201 0518SE | 12.5 | 18 | ED |
| SF201 0818SE | 20 | 18 | ED |
| SF201 1018SE | 25 | 18 | ED |
| SF201 0535SE | 12.5 | 35 | ED | automotive electronics etc.. |
| SF201 0835SE | 20 | 35 | ED |
| SF201 1035SE | 25 | 35 | ED |
| SF201 1070SE | 25 | 70 | ED |
| SF201 2070SE | 50 | 70 | ED | Motor, digital products etc.as univeral connector |
| SF201 0512SR | 12.5 | 12 | RA |
| SF201 0812SR | 20 | 12 | RA |
| SF201 1012SR | 25 | 12 | RA |
| SF201 0518SR | 12.5 | 18 | RA |
| SF201 0818SR | 20 | 18 | RA |
| SF201 1018SR | 25 | 18 | RA |
Brief Introduction of FPC
Flexible Printed Circuit Board (FPC) is referred to as "soft board". In the industry, FPC is a printed circuit board made of flexible insulating substrate (mainly polyimide or polyester film), which has many advantages that rigid printed circuit boards do not have. For example, it can be freely bent, wound, folded. The volume of electronic products can be greatly reduced by using FPC, which is suitable for the development of electronic products in the direction of high density, miniaturization and high reliability. Therefore, FPC has been widely used in aerospace, military, mobile communication, laptop, computer peripherals, PDA, digital camera and other fields or products.
FPC also has the advantages of good heat dissipation, solderability, easy mounting and low cost.
Flexible printed circuit board has one layer, two layers and multilayer board. The base material is polyimide clad laminate. This kind of material has high heat resistance and good dimensional stability. It is the final product through pressing with the coating film which has both mechanical protection and good electrical insulation. The surface and inner conductors of double-sided and multi-layer printed circuit boards are metallized to realize the electrical connection of inner and outer layers.
The function of flexible circuit board can be divided into four kinds, namely, lead line, printed circuit, connector and multifunction integrated system, which cover computer, computer peripheral auxiliary system, consumer household electrical appliance and automobile, etc.
